In classical magnetostatics, Ampère's Circuital Law states that the line integral of magnetic field 𝐁 along any closed Amperian loop C bounding an open surface S equals μ₀ times the net conduction current I_c threading through the surface:
In 1864, James Clerk Maxwell identified a fundamental logical inconsistency in this law when applied to time-dependent non-steady currents, such as the charging or discharging of a parallel-plate capacitor.
The Capacitor Paradox: Consider a circular Amperian loop C surrounding the wire leading to a capacitor plate being charged by a time-varying current i(t):
- If we choose a flat circular surface
S₁bounded byC, the conduction current piercesS₁, giving:∮_C 𝐁 · d𝐥 = μ₀ i(t) - If we choose a bulging bag-shaped surface
S₂with the same boundary loopC, but whose pouch extends into the gap between the capacitor plates, no conduction current threadsS₂because the gap contains only vacuum or an ideal dielectric (I_c = 0). This yields:∮_C 𝐁 · d𝐥 = 0
Since the left-hand side depends solely on the boundary path C, two different surfaces sharing the exact same perimeter cannot yield two conflicting values (μ₀ i(t) ≠ 0). This proved that Ampère's circuital law was incomplete for time-varying electrodynamic fields.
Maxwell recognized that while no mobile electric charges cross the dielectric gap, the electric field between the plates changes rapidly as charge accumulates. For plate area A carrying instantaneous charge q(t), the uniform electric field is:
The total electric flux Φ_E passing through surface S₂ inside the capacitor gap is:
Differentiating electric flux with respect to time:
Maxwell postulated that this rate of change of electric flux acts as a source of magnetic field equivalent to a real current, defining the Displacement Current (I_d):
I_d = ε₀ (dΦ_E / dt)
In a dielectric medium of permittivity ε = ε_r ε₀, the displacement current becomes I_d = ε (dΦ_E / dt).
The total current I_total is the sum of conduction current (carried by moving charges in conductors) and displacement current (produced by time-varying electric flux in space):
| Region | Conduction Current (I_c) | Displacement Current (I_d) | Total Current (I_total) |
|---|---|---|---|
| Connecting Lead Wires | i(t) = dq/dt | 0 (E is constant along wire) | i(t) |
| Capacitor Plate Gap | 0 (No charge crosses gap) | ε₀ (dΦ_E/dt) = dq/dt = i(t) | i(t) |
Thus, total current satisfies continuous flow across the entire circuit: outside the plates, current exists purely as conduction current, while inside the gap, it transitions seamlessly into displacement current.
Incorporating displacement current into Ampère's circuital law produces the generalized Ampère-Maxwell Law:
This symmetric formulation establishes that magnetic fields are produced by two distinct physical mechanisms: conventional moving electric charges (I_c) and time-varying electric fields (dΦ_E/dt).